A fighter's arms are in front of the body in almost every action: they hold the weapon, raise the shield, block a cut and push away a thrust. That is why armorers could never leave them bare, and why arm defenses became some of the most carefully engineered pieces of a harness. The arm has to bend at the elbow and the wrist, rotate along its length, and still close a hand around a sword grip. Medieval armorers solved this with a chain of small plates: tubes for the upper arm and forearm, a hinged cap for the elbow, and a plate glove for the hand.
For a LARP player, arm armor is also the easiest way into plate. Bracers fit over almost any sleeve, they protect the area that gets hit most often, and they instantly make a costume look like armor. In this guide we explain the names (rerebrace, vambrace, couter, cannon, gauntlet), follow how arm and hand defenses developed from mail to plate, compare the main gauntlet types (hourglass, mitten and fingered), look at what surviving originals weighed, and show what this means when you choose bracers or hand guards for a weekend in the field.
Arm Armor at a Glance
Names were used loosely in the period and are still used loosely in museums. The table gives the terms as they are most often used today, with dates for the pieces as they appear in museum collections. Dates are approximate, and older forms stayed in use long after new ones appeared.
| Piece | Protects | Typical period | Main feature | LARP use |
|---|---|---|---|---|
| Rerebrace | Upper arm | 15th to 16th century | Tube or lames above the elbow | Full plate looks, usually with pauldrons |
| Couter | Elbow | 14th to mid-17th century | Shell-like plate, later movable lames | The detail that makes a bracer look like a real arm harness |
| Vambrace | Forearm (or the whole arm defense) | 14th to 17th century | Upper and lower cannons joined at the couter | Bracers: the most worn piece of arm armor |
| Hourglass gauntlet | Hand and wrist | Mid-14th century onward | Large cuff, narrow wrist, plated knuckles | Early plate and knightly characters |
| Mitten gauntlet | Hand, fingers in one shell | 15th to 16th century | Plates over the hand, fingers not separate | Grip is limited, strong silhouette |
| Fingered gauntlet | Hand with each finger | Late 16th to 17th century | Scaled finger defenses, hinged thumb | Late knights, duelists, cavalry |
The Names of the Arm Harness
Armor terminology is a mixture of medieval French and English words, later collectors' names, and modern habits. A few definitions make the rest of this guide easier to follow.
Rerebrace
The rerebrace protects the upper arm, between the shoulder and the elbow. Museum records include small examples from a large find of medieval armor discovered in 1840 in a Venetian fortress on the Greek island of Euboea (the Chalcis hoard). One steel rerebrace from this group, dated about 1430 to 1440, weighs 13.2 oz (374.2 g, about 0.37 kg or 0.82 lb), according to the Metropolitan Museum of Art. In the same collection a rerebrace and couter combined as one piece weigh 1 lb 1.8 oz (504.6 g, about 0.5 kg), a light load for the upper arm.
Vambrace
The vambrace protects the forearm, or in a wider sense the whole arm defense. The Fitzwilliam Museum describes a vambrace as built from an upper cannon and a lower cannon, with the couter connecting the two. A "cannon" here means a tube-shaped section of armor around the limb. In everyday LARP language, "bracers" and "vambraces" mean the same thing: plates for the forearm.
Couter
The couter protects the elbow. According to the Fitzwilliam Museum's terminology record, couters began in the 14th century as a single rigid curved plate, later developed into sets of movable lames loosely riveted together, and stayed in use until the mid-17th century. The same record lists them as being attached between the upper and lower cannons of the vambrace.
Besagew and Wing
The elbow and the armpit are open joints, so armorers added extra discs and side plates. The Fitzwilliam terminology record defines the besagew as a small, usually round or oval plate attached to pauldrons, spaulders and vambraces to protect the open joints at the armpits and elbows. A record for a left vambrace of about 1510 in the Worcester Art Museum (the former Higgins Armory collection) also mentions the "wing" of the couter, which carried rope-like decoration: even the side plates of an elbow were treated as a place for ornament.
From Mail to Plate: How Arm Armor Developed
For much of the early and high Middle Ages, the arm was protected by mail. The Metropolitan Museum describes the knight's hauberk of the late 12th and 13th centuries as a long-sleeved mail shirt, sometimes with a hood, so the sleeves guarded the arms. The same Met essay on medieval arms and armor explains that improved crossbows could pierce mail in the 14th century, and that articulated plate armor was developed for the legs, arms and hands in response. By about 1420, full head-to-toe plate armor was in use.
Plate on the arm did not appear all at once. By the end of the 13th century, plate was already being used to reinforce mail, and plate gauntlets gradually supplemented and then replaced older mail mittens, according to a myArmoury review of hourglass gauntlets. Early plate gauntlets sometimes used whalebone rather than steel. By the mid-14th century, the hourglass gauntlet appeared and became the dominant plate gauntlet for the rest of that century.
In the 15th century, Italian and German workshops produced complete plate arm harnesses. The Chalcis hoard pieces in the Met, dated by the museum to roughly the 1430s to 1470, show how varied these pieces were: a couter weighing only 5 oz (141.7 g), others of 9.7 to 10.9 oz (about 275 to 309 g), and a Milanese vambrace of about 1450 to 1460 with an elbow reinforce that weighs 4 lb 7.4 oz (2024 g, about 2.02 kg or 4.46 lb) overall, of which the arm defense is 2 lb 6.5 oz (1089 g) and the elbow reinforce 2 lb 1 oz (934 g), according to the Met.
In the 16th century, couters became more complex. A northern German "bracelet" couter of about 1540 in the Worcester Art Museum is described as a closed shell with deep lobes, sharply pointed at the elbow, with a roped rib and a weight of 15 oz (about 0.43 kg or 0.94 lb). An early 16th-century couter in the Fitzwilliam Museum (1510) is a single shell-like plate open at the back and weighs 0.36 kg (0.79 lb).
Upper and Lower Cannons
A plate arm is easiest to understand as a set of tubes joined by hinges. The upper cannon covers the upper arm, the lower cannon covers the forearm, and the couter links them. The Fitzwilliam record for a couter of 1510 notes that it belonged to an arm defense of the "splint" type and was worn with armor of the almain rivet type, a kind of infantry armor.
Details varied from piece to piece. A record for a German cuirassier vambrace of 1620 to 1625 at the Worcester Art Museum describes a closed couter built from a main plate with one lame above and one below, and a lower cannon closed in a "tulip" form. The museum gives 6 lb 1 oz (about 2.75 kg) for the vambrace measured together with its pauldron.
In LARP: almost all modern bracers are simplified versions of the lower cannon. They are usually one shell that wraps around the forearm and closes with leather straps. This is the most practical form for play, because you can put it on yourself and take it off between fights.
Gauntlets: Armor for the Hand
The hand is small but complicated: it needs to grip, point, push and pull. That is why gauntlets came in several forms, each a different compromise between protection and dexterity.
Hourglass Gauntlets
The hourglass gauntlet appeared in the mid-14th century. According to myArmoury, a large plate protects the back of the hand, the wrist and part of the forearm; it is wide at the hand, narrows at the wrist and flares out again at the cuff, which gives the type its name. The knuckles were embossed, and many examples protect only the back of the hand, though some also have finger plates. They were built on a leather liner with a glove sewn onto it, and original pieces were often decorated with brass or bronze rivets and edging.
In LARP: the hourglass shape is the classic 14th-century knightly gauntlet. It works with open and half-open styles of armor and leaves your fingers mostly free to hold a weapon. It suits early plate characters and older knightly orders.
Mitten Gauntlets
Mitten gauntlets cover the hand and fingers with a few large plates, so the fingers are not separate. A mitten gauntlet from the workshop of the Missaglia family of Milan, dated to the late 15th century (the Met suggests probably before 1460), is made of four plates joined by rivets and has a long pointed cuff. The Met notes that it was originally fitted with a leather glove, possibly reinforced with mail or thin plates to protect the exposed fingertips. German pairs from about 1580 and 1600 in the same museum show the type lasting well into the 16th century: a pair of about 1580 weighs 1 lb 1.7 oz (500 g, including the museum's mannequin hand) and 14.2 oz (403 g), and a pair of about 1600 weighs 2 lb 2.4 oz (974 g) and 1 lb 15.5 oz (893 g).
In LARP: mitten gauntlets look dramatic, but they limit your grip. Players who want a heavy, plate-clad character often use them for scenes and take them off or switch to open-fingered hand guards for fighting.
Fingered Gauntlets
Fingered gauntlets protect each finger with its own set of scaled plates and often a hinged thumb. A steel duelling gauntlet of about 1610 in the Fitzwilliam Museum has a long tubular cuff, wrist, metacarpal and knuckle plates, scaled finger defenses and a hinged thumb, and weighs 0.5 kg (1.1 lb). A left field gauntlet of 1610 to 1620 in the same museum weighs 0.51 kg (1.12 lb), and a right-hand field gauntlet of about 1620 weighs 0.28 kg (0.62 lb). A pair of light field gauntlets of about 1600 from the same collection weigh 0.65 kg (1.43 lb) for the left and 0.77 kg (1.70 lb) for the right.
In LARP: fingered gauntlets give the best grip of the closed types and suit late-period knights, officers and duelists. They are also the hardest to fit well, because every finger needs its own plates.
Parade and Child Gauntlets
Not every gauntlet was meant for battle. The Met holds a pair of small gauntlets from a foot-tournament armor made in Milan in about 1585 for the seven-year-old heir to the Spanish throne, decorated with gold-damascened bands. The Victoria and Albert Museum has a pair of steel gauntlets of about 1614 made in Madrid with gold damascening and a lining of crimson silk velvet, which the museum thinks may belong to parade armors for the sons of Philip III of Spain. Armor was a status symbol as much as protection.
The Tournament Arm: The Manifer and the Left Elbow
In the jousting field the left arm was often the most exposed. The Met describes a left vambrace made in Augsburg about 1580, attributed to Anton Peffenhauser, from a set of tournament armors ordered by the Duke of Bavaria in 1579 to 1580. In German-style tilting, riders struck left side to left side across a barrier, so the left side needed more protection. These armors had large, smooth reinforcing plates, a helm screwed to the breastplate and backplate, a tilt targe on the breastplate, a passguard over the left elbow and an oversized left gauntlet called the manifer.
The same asymmetry appears in other armor. The Met notes that fifteenth-century Italian armor is usually asymmetrical, with larger plates protecting the left side, the first point of an enemy's attack, while German armor of the same time favored a slim, symmetrical outline.
In LARP: asymmetry is a very effective visual trick. One large bracer or a big elbow guard on the left arm, and a smaller, lighter one on the right, makes a character look like a veteran jouster or duelist. Check your event rules first, though, because armor coverage rules differ from game to game.
How Much Did Arm Armor Weigh?
Weight matters more for arms than for the torso, because the arms move all the time and tire quickly. The table gives surviving originals from museum collections, in metric and imperial units.
| Piece | Date and origin | Weight | Museum |
|---|---|---|---|
| Couter | About 1430 to 1440, Italian | 141.7 g (5 oz, 0.31 lb) to 309 g (10.9 oz, 0.68 lb) | Metropolitan Museum of Art |
| Rerebrace | About 1430 to 1440, Italian | 374.2 g (13.2 oz, 0.82 lb) | Metropolitan Museum of Art |
| Forearm defense (vambrace) | About 1450 to 1470, Italian | 388.4 g (13.7 oz, 0.86 lb) | Metropolitan Museum of Art |
| Upper arm defense and couter, one piece | About 1450 to 1460, Milan | 1000.7 g (2 lb 3.3 oz) | Metropolitan Museum of Art |
| Left arm defense with elbow reinforce | About 1450 to 1460, Milan | 2024 g (4 lb 7.4 oz) | Metropolitan Museum of Art |
| Couter | 1510, early 16th century | 0.36 kg (0.79 lb) | Fitzwilliam Museum |
| Left vambrace with couter | About 1510, Italian | 2 lb 6 oz (about 1.08 kg) | Worcester Art Museum |
| Mitten gauntlets (pair) | About 1580, Nuremberg | 500 g (1 lb 1.7 oz) and 403 g (14.2 oz) | Metropolitan Museum of Art |
| Fingered field gauntlets (pair) | About 1600, South German | 0.65 kg (1.43 lb) and 0.77 kg (1.70 lb) | Fitzwilliam Museum |
These weights are for single pieces, not a full arm. A complete arm harness added up quickly: a mid-15th-century upper arm with a couter near 1 kg, a forearm defense, a gauntlet, and straps or arming points to fasten everything. For the bigger picture, see our article on how much medieval armor weighed.
Comparing Arm Armor for LARP
In LARP, the best arm armor is not always the heaviest. You need to swing a weapon, hold a shield, shake hands in roleplay and eat lunch in the camp. The comparison below is a practical guide, not a rule.
| Piece | Mobility | Grip | Coverage | Best for |
|---|---|---|---|---|
| Forearm bracers only | Excellent | Excellent | Low to medium | Beginners, light characters, long days |
| Bracers with hand guards (fingers free) | Very good | Very good | Medium | Commanders, warriors, shield and sword fighters |
| Hourglass gauntlets | Good | Good | Medium | 14th-century knights |
| Mitten gauntlets | Limited | Limited | High | Display, roleplay, some shield play |
| Fingered gauntlets | Good | Good | High | Late knights, duelists |
| Full arm harness (rerebrace, couter, vambrace) | Medium | Excellent | Very high | Full plate characters |
A simple rule: the more your character fights, the more mobility you need at the elbow and wrist. Heavily armored characters can add more plate, but should always test the fit before the event by swinging a weapon and holding a shield for several minutes.
Steel or Polyurethane: Which Arm Armor for LARP?
Good steel reproductions exist, but they come with trade-offs for LARP:
- Weight on a moving limb. A single original arm defense with an elbow reinforce can weigh more than 2 kg, as the Milan example above shows. A weighty arm tires you faster than a heavy breastplate.
- Heat and rust. Steel gets hot in sun and needs regular care against rust.
- Event rules. Many LARP events restrict real steel armor in combat or require it to be checked first.
Our bracers are made from polyurethane resin reinforced with fiberglass and painted by hand. Rules still differ from game to game, so always read the armor rules of your event before you choose. For a broader comparison of materials, read What Is the Best Type of LARP Armor? If you want to know how the armor is made, see our guide to how polyurethane LARP armor is made.
How to Wear Bracers and Gauntlets
A few simple habits make arm armor comfortable and keep it where it should be.
- Wear a padded sleeve. Bracers sit better and rub less over a gambeson sleeve or a thick shirt. Read our guide to gambeson, aketon and arming doublet to see how historical padded layers worked.
- Set strap tension with your weapon in hand. Bend your wrist, grip the weapon, and raise your arm. The bracer should stay in place and not squeeze.
- Check that you can still use a shield. Elbow plates should not catch on the shield arm.
- Think about the pauldron. A large shoulder piece needs room at the upper arm, so match the arm and shoulder pieces from the same line.
- Take care of the fit between fights. Loosen straps during long breaks so your skin can recover.
Which Arm Armor Fits Your Character
- Knight or paladin: a full arm harness or heraldic bracers. See our Knight and Paladin collections.
- Mercenary or soldier: simple bracers or a single vambrace with a leather outfit. See the Landsknecht collection.
- Northman or barbarian: bracers over bare forearms or leather sleeves. See Northmen and Barbarian.
- Commander or battle priest: layered bracers with hand guards. See Battle Priest.
- Witch hunter or duelist: a single decorated bracer or a fingered gauntlet. See Witch Hunter.
- Ranger or archer: forearm bracers only, for light and mobile play. See our medieval hoods to complete the look.
How Our Bracers Relate to Historical Arm Armor
All our bracers are original designs of our workshop in Ukraine, inspired by history and classic fantasy archetypes. They are simplified forearm shells in the tradition of the vambrace, not copies of museum pieces. You will find three pairs in our LARP Bracers collection:
- Lion Knight Bracers: a pair of bracers with leather straps and padding, in dark metal with bronze ornament, heraldic shield details and fleur-de-lis. Base colors are Dark Metal and Bronze.
- Flower Knight Bracers: a pair with leather straps and padding, in dark metal with antique silver highlights, raised flowers and vine-like patterns.
- Empire Commander Vambraces: layered forearm armor with sculpted skull hand guards. You can choose forearm bracers only, or bracers with hand guards that extend over the backs of the hands. The hand guards leave the fingers free and are secured with cords for a more stable fit.
The hand guards of the Empire Commander pair are the closest we come to a gauntlet: they cover the back of the hand like the cuff and metacarpal plates of a gauntlet, but they leave the fingers free so you keep your grip. Bracers are also part of several of our full sets, such as Lion Armor, Flower Knight Armor and Empire Commander Armor. Matching shoulder pieces are in the LARP Pauldrons collection, and you can see everything together in the LARP Armor Sets collection.
Every pair is painted by hand, and recoloring in your colors is free. If you are not sure about size, measure your forearm at its widest point and compare it with the Size Guide on the product page, or write to us before ordering. Production usually takes 7 to 21 business days, and we ship worldwide. Take care of your bracers as described in our Armor Maintenance guide.
Want Arm Armor That Is Not in Our Shop?
If you dream of a full rerebrace, couter and vambrace set, a pair of hourglass-style hand guards, or a single oversized left bracer for a jouster, we can make it as a custom piece. We usually start with a 2D concept, then a 3D sculpt, and then make the mold and the piece. Tell us your idea on our Custom LARP Armor page. If you equip a whole group, group orders from 5 players get 15% off: see Group Orders. Instalment payments are available.
Further Reading
- The Metropolitan Museum of Art: Arms and Armor in Medieval Europe
- The Metropolitan Museum of Art: Left Arm Defense (Vambrace) with Elbow Reinforce
- The Metropolitan Museum of Art: Mitten Gauntlet, Missaglia workshop
- The Metropolitan Museum of Art: Left Vambrace, Augsburg, about 1580
- The Fitzwilliam Museum: Couters (terminology)
- The Fitzwilliam Museum: Couter, 1510
- Worcester Art Museum: Left Vambrace, about 1510
- myArmoury: 14th Century Hourglass Gauntlets
Want to see how armor developed as a whole? Read The Evolution of Knight Armor: From Mail to Plate.



