Pauldrons, Spaulders and Rerebraces: Medieval Shoulder Armor Explained

Pauldrons, Spaulders and Rerebraces: Medieval Shoulder Armor Explained

Table of Contents

The shoulder is the hardest joint to armor. It has to move in almost every direction, it sits right next to the neck and the head, and in a fight it takes cuts, thrusts and, on horseback, the full impact of a lance. Armorers spent roughly two centuries solving the problem: from small squares of hard material over the shoulder joints in the 1300s, to the sliding steel lames of the 1400s and 1500s, to the tall, asymmetrical shoulder pieces of the tournament field.

For a LARP player, the shoulder is also where a character gets most of its silhouette. A broad pauldron says commander, a pair of fan-shaped plates says Italian mercenary, and one big shoulder with a raised edge beside a small one says duelist or jouster. In this guide we explain the terms (pauldron, spaulder, rerebrace and the rest), follow how shoulder defenses developed from the 14th to the 16th century, look closely at the haute-piece, and show why many real armors were deliberately lopsided. We also compare weights of surviving originals and explain what this means for armor you wear for a whole weekend.

Left pauldron by Kolman Helmschmied, about 1525, Metropolitan Museum of Art
Left pauldron by Kolman Helmschmied, Augsburg, about 1525. The Metropolitan Museum of Art, New York. Public domain (CC0) · Source
Italian right pauldron, about 1570
Right pauldron, Italian, about 1570. The Metropolitan Museum of Art, New York. Public domain (CC0) · Source
French pauldron and rerebrace, late 16th century
Pauldron and rerebrace, French, late 16th century. The Metropolitan Museum of Art, New York. Public domain (CC0) · Source

Shoulder and Arm Armor at a Glance

Names were not fully fixed in the period, and museum catalogues still use them loosely (the Metropolitan Museum, for example, has a piece titled "Shoulder Lame from an Almain Collar, or Top Lame of a Spaulder Pauldron"). In this guide we use pauldron for the whole shoulder defense and spaulder for the older word you meet in books and catalogues. The table below shows the parts you will meet most often.

Part What it covers Main period Typical wearer LARP characters
Ailettes Shoulder joints (small squares of hard material) Early plate age (14th century) Knights of the early plate age Knights in transitional mail-and-plate kit
Spaulder or pauldron Shoulder, built from lames or a main plate with lames 15th to 17th century Men-at-arms, cavalry, officers Knights, mercenaries, commanders
Fan-shaped pauldron Shoulder, small plate with a jagged lower edge Late 15th century, Italy Men-at-arms in Gothic armor Sellswords, duelists, city-state captains
Haute-piece Neck side, an upright flange on the pauldron Mid 15th to mid 16th century Horsemen, often removable Cavalry officers, champions, warlords
Grandguard Left shoulder and chest, large reinforce for the joust 16th century Jousters Tournament champions
Rerebrace Upper arm 15th century and later Men-at-arms Knights, veterans
Couter Elbow 15th century and later Men-at-arms Knights, veterans
Vambrace Lower arm 15th century and later Men-at-arms, cavalry Every fighting character

From Ailettes to Plate: How Shoulder Defense Developed

The 14th Century: Small Plates Over Mail

The Metropolitan Museum explains that improved crossbows in the 14th century could pierce shields and mail, and that this pushed armorers to build articulated plate defenses for the legs, arms and hands. The shoulder joint was covered by small squares of hard material called ailettes. The same essay notes that solid breastplates appear by the late 1300s, and that full head-to-toe plate was in use by about 1420.

In LARP: if you play a knight of the early plate age, pair a mail or gambeson base with a small shoulder plate rather than a big layered pauldron. It looks lean, and it leaves the arm free. Our gambesons give you the padded layer such a look needs.

The 15th Century: Lames, Rerebraces and Two National Styles

By about 1420 the Metropolitan Museum describes full plate armor as a defense enclosing almost the entire body with a system of steel plates articulated by rivets and leather straps. That article also says Italy and Germany were the largest armor producers and that their styles set fashion across western Europe. German armor favored a slender, symmetrical outline, while Italian armor was typically asymmetrical, with larger plates on the left side, which faced the enemy's first attack.

Arm pieces from this century survive in good numbers. A rerebrace (upper arm defense) from the large find of medieval armor discovered at Chalcis in 1840 is dated to about 1430 to 1440, is Italian, and weighs 374.2 g (13.2 oz), according to the Metropolitan Museum record. A single upper-arm plate that light shows how much the weight of a harness depended on how many plates you stacked together.

The Cleveland Museum of Art holds a pair of Milanese "Gothic fan-shaped pauldrons" dated about 1485 to 1500, stamped with marks that the museum links to the Missaglia workshop, with a listed weight of 820 g (1.81 lbs). The museum's caption describes the two guards as mirror images with jagged lower borders.

In LARP: fan-shaped plates suit a character who values speed over bulk: a mercenary captain, a duelist, a city-state guard. They also sit comfortably under a cloak or a tabard.

The 16th Century: Layered Pauldrons and Tournament Reinforces

In the 1500s the pauldron grew into a built-up assembly. The Wallace Collection describes a field armor of about 1500 to 1510 whose pauldrons encircle the shoulders and are each made of six plates, attached to the gorget with spring pins. A later piece from the Worcester Art Museum, a left pauldron from the armor of Galiot de Genouilhac (1518 to 1525), is made of six articulated lames working on sliding rivets and weighs 4 lb 4 oz (about 1.93 kg).

By about 1580 the Fitzwilliam Museum records pauldrons of seven lames joined by a turner to a vambrace, made for heavy or medium cavalry use. Around 1620 to 1635 the Wallace Collection's three-quarter armor from northern Italy has pauldrons each built up of a main plate and three large lames, so the sliding-lame idea survived into the 17th century in a simpler form.

In LARP: a layered pauldron is the best way to show rank. The more lames and the more decoration, the higher the status your character claims. Our LARP Pauldrons collection covers this whole range, from ornate heraldic designs to plain soldierly ones.

Pauldron, Spaulder or Rerebrace: Which Is Which?

Pauldron and Spaulder

Both words name the shoulder defense. The museum examples in this guide are mostly built from a main plate over the shoulder with lames below it, and some of those lames slide on rivets so the arm can lift. The Royal Armouries puts it simply: a pauldron is a piece of armour designed to protect the shoulder. Because museums mix the words, do not worry if a book calls the same object a spaulder.

Rerebrace, Couter and Vambrace

The arm was armored in three sections. The rerebrace protects the upper arm, the couter the elbow, and the vambrace the lower arm. Museum object titles show the three working as a chain, for example the Metropolitan Museum's Rerebrace, Couter, and Vambrace (Italian, Savoy, after 1585). Together with the pauldron, they made a continuous plate sleeve.

In LARP: if you want the arm to look finished, match the family of ornament across pauldron, bracer and upper-arm piece. Some players leave the upper arm bare to keep the arm free. If you only wear shoulders and bracers, the arm can still read as armored from a distance. See our LARP Bracers.

The Haute-Piece: The Raised Neck Guard

What a Haute-Piece Really Was

The haute-piece is the most misunderstood part of shoulder armor. The Fitzwilliam Museum's terminology entry defines haute-pieces as outward-curving flanges of plate metal, either riveted to the pauldrons or forged in one piece with the gardbraces, designed to give extra protection for the neck. The same entry says they were used from the mid-15th to the mid-16th century by horsemen and were often made removable for foot combat or the field.

So a haute-piece is not a crest or a decoration: it is a standing plate that rises from the top edge of the pauldron beside the neck.

Forged In, Riveted On, or Removable

Surviving pieces show all three ways of making one:

The Worcester Art Museum's catalogue entry for the Genouilhac left pauldron (1518 to 1525) describes it as similar in form and construction to the right one and lists a "higher haute-piece".

Why a Haute-Piece Belongs on One Side

Two of the haute-pieces cited above belong to left pauldrons (the Wallace garniture and the Fitzwilliam reinforce), and the left shoulder is the one that faced the lance in the joust. We come back to this in the next section.

In LARP: a raised plate beside the neck gives a character an instantly readable "mounted knight" profile. Before you buy, check two things. First, can you turn your head and drink without hitting the plate? Second, does your event allow rigid protruding parts on armor? Rules differ between games, so check yours.

Left and Right: Why Real Shoulder Armor Was Lopsided

The Joust Explains the Asymmetry

Tournament armor is the clearest case. The Cleveland Museum of Art explains that jousters rode along a barrier called the tilt with their left sides facing each other, so the left side of the armor was made thicker, and that a large plate called a grandguard protected the left shoulder. The lance itself was carried in a bracket on the right breastplate, the lance-rest, which held it couched under the right armpit.

The Metropolitan Museum's "Armor for the Tilt" (about 1580, 36.8 kg / 81 lb) makes the same point: because the left side of the rider was particularly vulnerable, it received large, smooth reinforcing plates that would deflect the lance.

The Wallace Collection's armor for the German "joust of peace" (about 1500 to 1520) weighs 40.91 kg (90.2 lbs). The museum notes that the lance usually struck the rider's left side, which is why those areas were heavily reinforced, and that a projecting peg on the pauldron should only be fitted on the right shoulder.

Weights Were Not Always Mirrored

Do not assume the left piece was always the heavier one. The Metropolitan Museum's data on surviving pairs shows a mixed picture. A pair of tournament pauldrons marked by Lorenz Helmschmid of Augsburg (about 1500) for the German joust weighs 1786 g for the right and 1814.4 g for the left, a small difference. An Italian pair from about 1560 has a left pauldron of 1389.1 g and a right pauldron of 1162.3 g, while another Italian pair (about 1565 to 1575) has the left at 1105.6 g and the right at 1219 g. This looks inconsistent, but it is simply what the museum measured.

In LARP: asymmetry is a gift to the costume designer. One large pauldron with a raised edge and one smaller plate looks historical and dramatic, and it leaves your weapon arm freer. If you fight with a right-hand weapon, putting the big piece on the left matches the historical logic of leading with the left side.

Our Pauldrons With a Crest

"Bladebreaker" is our own name for the crest on the pauldron. Our pauldrons are fantasy designs, not replicas of historical pieces, and a crest should not be confused with a historical haute-piece, which was a neck guard. In the Empire Commander Armor Full Set, the pauldron with the bladebreaker is made for the left shoulder by default, and the set also includes one small pauldron for the opposite shoulder. A second matching large pauldron can be ordered separately. A large piece on one side and a small one on the other echoes the asymmetry of historical jousting harness.

If you want just the shoulders, the Empire Commander Pauldron is a single left-shoulder piece, sold as one pauldron with lining and without additional straps. For pairs, see the Lion Knight Pauldrons, the Flower Knight Pauldrons, the Empire Armor Pauldrons and the Imperial Guardian Pauldrons.

A fantasy detail with a historical echo: the Royal Armouries' left pauldron from the "Lion Armour" (about 1550) is shaped so that the wearer's arm extends out of the lion's open mouth. Sculpted shoulders are not new.

Comparing Surviving Shoulder Pieces by Weight

These figures come from museum records of original pieces. They show a range, not a rule: weights depend on date, size, thickness and whether the piece is a war pauldron or a tournament reinforce.

Piece Date and origin Weight Collection Best for (LARP use)
Rerebrace (upper arm) c. 1430 to 1440, Italian 374.2 g (13.2 oz) Metropolitan Museum Light, early plate look
Gothic fan-shaped pauldrons c. 1485 to 1500, Milan 820 g (1.81 lbs) Cleveland Museum of Art Mercenaries, duelists
Tournament pauldrons, Helmschmid c. 1500, Augsburg Right 1786 g (3 lb 15 oz), left 1814.4 g (4 lb) Metropolitan Museum Jousting characters
Left pauldron, Genouilhac 1518 to 1525 4 lb 4 oz (about 1.93 kg) Worcester Art Museum Nobles, commanders
Left pauldron with haute-piece c. 1540 to 1550, Augsburg 1.71 kg (3.8 lbs) Wallace Collection Mounted champions
Pair of pauldrons and arm defenses c. 1560, Italian Left pauldron 1389.1 g (3 lb 1 oz), right 1162.3 g (2 lb 9 oz) Metropolitan Museum Officers, cavalry
Tourney reinforce, left pauldron 1580 1.09 kg (2.4 lbs) Fitzwilliam Museum Tournament champions
Pauldron and arm c. 1620 to 1635, northern Italy Left 2.54 kg (5.6 lbs), right 2.46 kg (5.4 lbs) Wallace Collection Late cuirassiers

For scale, the Wallace Collection's field armor of about 1500 to 1510 weighs 19.56 kg (43.1 lbs) in total, and its joust armor of about 1500 to 1520 weighs 40.91 kg (90.2 lbs).

Steel or Polyurethane: Which Shoulder Armor for LARP?

A pauldron sits on the trapezius and the collarbone, and the straps pull it forward. The original pauldrons in the table above range from about 0.8 to 2.5 kg (the heaviest figure includes the attached arm), which is heavy for a long day, and a haute-piece or a tall flange is a rigid edge that can catch on a hood or a cloak. For LARP, steel also has the usual drawbacks:

  • Weight. The museum figures above show original pauldrons from 820 g up to about 2.5 kg for a pauldron with its attached arm. Add straps, lining and a harness.
  • Heat and rust. Steel gets hot in the sun and needs regular care against rust.
  • Event rules. Events set their own rules on metal armor and rigid edges, so read yours before you buy.

Our armor is cast from polyurethane resin reinforced with fiberglass and painted by hand, so it looks like forged or sculpted metal without the weight. Rules still differ from game to game, so always check the armor rules of your event. For care tips, read How to Care for Your Polyurethane LARP Armor, and to see how it is made, read The Ultimate Guide to How Polyurethane LARP Armor Is Made. For a wider comparison of materials, see What Is the Best Type of LARP Armor?

How Shoulder Armor Was Attached and How to Wear It

Historical pauldrons did not hang from the shoulder alone. The Wallace Collection's field armor of about 1500 to 1510 has spring pins on the gorget for attaching the pauldrons, and the later cuirassier armor of 1620 to 1635 has metal D-rings riveted on the shoulders for the same job. In both cases the pauldron is tied into the rest of the harness rather than resting on the wearer's own shoulder.

In LARP: the same idea applies to resin armor. Adjust the straps so the weight spreads across the chest and back, not only on the trapezius. Wear padding or a gambeson underneath, and test the full range of motion before the event: raise the arm, reach for a weapon, turn your head toward the haute-piece side. A pauldron that looks perfect standing still can be a problem when you swing a LARP-safe weapon.

Which Shoulder Armor Fits Your Character

  • Early plate-age knight or crusader: small shoulder plates over mail or gambeson. See the Paladin collection and our article on crusader knights.
  • Knight on campaign: a layered pauldron with a plain haute-piece or none, plus a rerebrace if you want a full plate sleeve. See the Knight collection.
  • Mercenary, duelist or landsknecht: small fan-shaped or lightly layered shoulders, often only on one side. See the Landsknecht collection.
  • Mounted champion or warlord: a large left pauldron and a smaller one on the right. See the Empire series.
  • Noble or heraldic knight: matching ornate pauldrons with sculpted detail. See the Lion Knight and Flower Knight series.

For the matching headgear, read our guide to types of medieval helmets and, if you plan a late medieval look, the sallet guide. To see where armor fits into the whole story, read The Evolution of Knight Armor: From Mail to Plate.

Our Shoulder Armor and Full Sets

All our shoulder armor is made in our workshop in Ukraine from original designs, and every piece is painted by hand. You can recolor any item in your colors for free. Production takes 7 to 21 business days, we ship worldwide, and instalment payments are available. The LARP Pauldrons collection lists every pauldron we make, and the LARP Armor Sets collection shows pauldrons together with breastplates, bracers, tassets and greaves. Planning your events? Our LARP Calendar lists the big ones.

Want Shoulder Armor That Is Not in Our Shop?

If you dream of a fan-shaped Gothic pauldron, a tall jousting haute-piece, a rerebrace to match your bracers, or shoulders in your faction's colors, we can make it. We usually start with a 2D concept, then a 3D sculpt, and then make the mold and the armor. Tell us your idea on our Custom LARP Armor page. If you equip a whole group, see our Group Orders page: orders from 5 players get 15% off.

Further Reading

Frequently Asked Questions

What Is the Difference Between a Pauldron and a Spaulder?

Both words name armor for the shoulder, and museums use them loosely. In this guide, pauldron means the whole shoulder defense, built from a main plate and sliding lames, and spaulder is the older word you meet in books and catalogues.

What Is a Haute-Piece on a Pauldron?

A haute-piece is an outward-curving flange of plate metal, riveted to the pauldron or forged in one piece with the gardbrace, that gives extra protection for the neck. Museum records place its use from the mid-15th to the mid-16th century, mostly by horsemen, and it was often removable.

Why Was Medieval Shoulder Armor Often Different on the Left and Right?

In the joust, riders passed left side to left side, so the left shoulder got larger and thicker plates such as the grandguard. The lance was carried in a rest on the right breastplate. The Metropolitan Museum also describes Italian armor as typically asymmetrical, with larger plates on the left.

What Is a Rerebrace?

A rerebrace is the plate defense for the upper arm. It joins the pauldron above and the couter (elbow) below, with the vambrace covering the lower arm. A Metropolitan Museum rerebrace from the Chalcis find, made in Italy around 1430 to 1440, weighs 374.2 g (13.2 oz).

How Much Did Original Pauldrons Weigh?

Surviving examples vary. A Cleveland pair of Milanese fan-shaped pauldrons is listed at 820 g (1.81 lbs), a Wallace Collection left pauldron with a haute-piece at 1.71 kg (3.8 lbs), and a Fitzwilliam tourney reinforce at 1.09 kg (2.4 lbs). A Wallace pauldron with its arm piece, from 1620 to 1635, is 2.54 kg (5.6 lbs).

Recommended Armor

Empire Armor Pauldrons

Empire Armor Pauldrons

Empire Armor Pauldrons

$157.50 $175.00
(1)

ITEM INFORMATION Set includes: 2 pauldrons with padding set Category: LARP Shoulder Armor Size: standard, fits almost any adult individualOur armor includes leather straps that allow you to adjust...

Empire Commander Pauldron

Empire Commander Pauldron

Empire Commander Pauldron

$252.00 $280.00

ITEM INFORMATION Category: LARP Shoulder Armor. Style: Dark Fantasy, Imperial Heraldic, Gothic Knightly Armor, Ornate Commander. Product Includes: One left pauldron with lining, without additional ...

Lion Knight Pauldrons

Lion Knight Pauldrons

Lion Knight Pauldrons

$225.00 $250.00

ITEM INFORMATION Category: LARP Shoulder Armor. Style: High Medieval Fantasy, Lion Knight Armor, Noble Knight Armor, Heraldic Armor. Product Includes: Pair of pauldrons with padding. Base Colors: D...

See all LARP Pauldrons
Share this article: