Parts of a Suit of Armor: Names and Functions

Parts of a Suit of Armor: Names and Functions

Table of Contents

A full suit of plate armor looks like one object, but it is really a kit of many separate pieces, each with its own name, job and way of being fastened. Museum catalogs use those names precisely, and so do reenactors, armorers and LARP crafters. If you know them, you can read a museum label, describe exactly what you want to a craftsperson, and avoid the classic mix-up of calling every shoulder piece a "shoulder guard" and every leg piece a "leg guard".

For a LARP player, the names matter even more, because armor is usually built up piece by piece. Most players do not start with a full harness: they begin with a breastplate or a helmet and add bracers, pauldrons or greaves over several events. In this guide we walk through the parts of a suit of armor from head to foot, explain what each one protects and how pieces were tied or riveted together, and then show how the same logic works for polyurethane LARP armor. If you want the bigger historical picture first, read our guide to The Evolution of Knight Armor: From Mail to Plate.

Complete Gothic plate armor, late 15th century, Metropolitan Museum of Art
Gothic armor, late 15th century, extensively restored. The Metropolitan Museum of Art, New York. Public domain (CC0) · Source
Italian full armor for field and tilt, about 1570
Italian armor for field and tilt, about 1570. The Metropolitan Museum of Art, New York. Public domain (CC0) · Source

Parts of a Suit of Armor at a Glance

The table follows the body from top to bottom. Museum terms come first, with common alternative names where they exist. Plate armor changed a lot over the centuries, so not every piece appears in every period or region.

Part Protects Short description In our shop
Helmet Head Many forms, from open to fully closed Helmets
Bevor Throat and lower face Lower face defense, worn with a helmet Custom order
Gorget Neck and upper chest A single plate or two hinged plates, often with extra lames at the top Custom order
Breastplate Front of the torso One contoured plate or several overlapping plates Breastplates
Backplate Back of the torso Broad strips or one plate, joined to the breastplate Breastplates
Cuirass Front and back of the torso Breastplate and backplate as a pair Breastplates
Plackart Lower front of the breastplate Extra plate attached to the breastplate Custom order
Fauld Abdomen below the breastplate Originally mail, later plates Tassets
Tassets Upper thighs A plate or lames joined by straps and rivets, worn at the front of the fauld or breastplate Tassets
Pauldrons Shoulders and upper arms One large plate or several articulated lames Pauldrons
Besagews Armpit and elbow openings Small round or oval plates fixed with straps, rivets or laces Custom order
Vambrace (upper and lower cannons) Upper arm and forearm Tubes of plate joined at the elbow by a couter Bracers
Couter (cowter) Elbow Joint piece between the upper and lower arm tubes Bracers
Gauntlets Hands Armored gloves, mittened or fingered Custom order
Cuisses Thighs Plate for the thigh, usually attached to the poleyn Greaves
Poleyns Knees Cup-shaped plate, often with extra lames and a side wing Greaves
Greaves Shins and lower legs One contoured plate or two hinged plates Greaves
Sabatons Feet Foot armor with plated coverings and a toecap Custom order

Armor Is a System: Layers, Points and Rivets

Before we go piece by piece, it helps to know that medieval and Renaissance armor was never just a shell of steel. The Metropolitan Museum of Art points out that a complete suit invariably consisted of a mixture of different materials. Mail, a mesh of interlinked rings, was the dominant body armor for a long period, into the 14th century. Plate for the body began to develop in the 13th century, and by about 1500 plate had largely replaced mail and fabric, which were then kept for secondary jobs such as covering joints and exposed areas.

Under the metal sat padded clothing. The Met describes the gambeson, a heavily quilted garment worn under mail and early plate, and the arming doublet, a specially fitted and padded garment to which plate pieces were fastened. Pieces were tied to the doublet with arming points: ribbons or strings. In its essay on 15th-century armor, the Met describes arming points as pairs of strings normally attached to the arming doublet, and notes that by about 1420 full plate armor had developed as a system of steel plates articulated by rivets and leather straps.

That one sentence explains most of what follows. Large plates cover the big, fairly rigid parts of the body (chest, back, thigh, shin). Smaller overlapping plates, called lames, are joined by rivets and straps so that they can slide over one another at the joints. The padded garment underneath carries part of the load and gives the points something to be tied to.

Why Layers Matter

The Met notes that mail protects well against cutting attacks but needs a quilted layer under it, which adds comfort and absorbs some of the force of a blow. Plate with its sloped surface deflects the points and edges of weapons and absorbs some energy, and plate combined with mail or fabric gave the best protection. The same source states plainly that no armor could make its wearer invulnerable. It also says that plate armor is lighter than most people think, and that a fully armored knight was expected to mount and dismount without help.

In LARP: the lesson for players is the same as for medieval wearers. A good padded layer (a gambeson, or at least a thick shirt) makes any armor more comfortable and gives you a base on which straps and buckles sit evenly. See our gambesons for that layer.

Dressing Order

According to the Met, dressing usually began with the legs, followed by the upper body and arms, with the helmet and gauntlets put on last. It is a good habit to keep for LARP too: legs first, then torso, then arms, and the helmet last so that you can still hear, see and breathe while the other straps are adjusted.

Head and Neck

Helmet

The helmet is the most varied piece of the whole suit. It can be open or closed, with a visor or without, and each form belongs to a particular period. We cover this in detail in Types of Medieval Helmets: A Guide for LARP Players, with separate guides on the sallet, great helm, bascinet and armet and close helmet.

One structural detail is worth knowing for reading armor descriptions: the Fitzwilliam Museum defines close helmets as closely fitting helmets with visor and bevor enclosing the head and face, in which all the main elements work on a common set of pivots at the temples.

In LARP: the helmet is usually the first and most visible piece. Choose it according to how much your character talks: open helmets for roleplay, closed ones for faceless fighters. Our own helmets weigh about 1 to 1.5 kg (2.2 to 3.3 lbs). Browse the LARP Helmets collection, for example the Infantry Armor Sallet Helmet.

Bevor

The Fitzwilliam Museum defines bevors as armor pieces protecting the throat and lower part of the face, worn either independently or attached to the helmet skull by pivoting rivets. It is the partner of the visor, which covers the upper part of the face. If a description mentions a visor and a bevor together, it refers to a helmet with a separate face defense on each level.

Gorget

The Fitzwilliam Museum in Cambridge defines gorgets as armor pieces protecting the neck and upper part of the chest, made either of a single plate or of two main plates, front and back, hinged together. Often, extra lames run along the upper edge and wrap around the neck.

In LARP: a gorget is a good first upgrade if you play with a closed or semi-open helmet, because it fills the gap between helmet and torso and gives a finished silhouette. If you want one in the style of your armor set, we can make it as a custom piece.

Torso

Breastplate, Backplate and Cuirass

The Fitzwilliam Museum describes the breastplate as a piece protecting the front of the torso, either a single contoured plate or a combination of two or more overlapping plates or lames. The backplate protects the back of the trunk, and it may be made of several broad strips joined by buckles, or of one plate attached to the breastplate by straps, hinges or similar fittings. Together, the front and back plates are called a cuirass. The Fitzwilliam notes that over history cuirasses were made of linen or leather layers, metal scales, lames or plates, and sometimes by joining leather and metal.

The Met adds a fashion note: around the middle of the 15th century, Italian armorers began producing all'antica armor, including muscled cuirasses, which reappeared in Europe for the first time since antiquity. These were popular for court festivities. That tradition of sculpted muscle and decorated plate is one reason fantasy armor can look so natural in a LARP setting.

In LARP: the breastplate is the heart of any armor set and the piece that sets the style of everything else. It is also the piece where the fit matters most, because it connects shoulder, back and hip armor. Look at our LARP Breastplates, such as the Lion Knight Breastplate or the Empire Armor Breastplate.

Plackart

A plackart is an extra piece attached to the breastplate. According to the Fitzwilliam Museum, early plackarts covered only the lower half of the breastplate, while later ones extended over the whole front and doubled its thickness. They were used in both tournament and field armor and became more common as firearms became more powerful.

Fauld and Culet

Below the breastplate sits the fauld. The Fitzwilliam Museum defines faulds as pieces of armor protecting the front of the abdomen below the breastplate, made originally of mail and later of plates. At the back, the Fitzwilliam Museum defines culets as armor pieces protecting the upper part of the buttocks, worn in both foot and mounted combat and made of one or more articulated lames.

Tassets

Tassets hang from the fauld or the lower breastplate and protect the upper thighs. The Fitzwilliam Museum describes them as a single plate or a series of lames flexibly connected by straps and rivets, worn at the front of each side of the fauld or breastplate. They are an excellent example of a piece that bridges two zones: they continue the torso armor downward and meet the thigh armor below.

In LARP: tassets add visual weight to the lower body and make the armor look like a complete harness, even if you have no leg plates yet. See our LARP Tassets, such as the Lion Knight Tassets or the Empire Armor Tassets.

Lance Rest

One more torso detail is worth knowing, because it often confuses beginners: a small projection on the right side of a breastplate. The Fitzwilliam Museum defines lance rests as devices attached to the right side of the breastplate, generally a small base plate with a short, sturdy arm that supports the lance and spreads the force of impact. The Met's essay on common misconceptions about arms and armor says the rest's main purpose is not to take the weight of the lance but to stop it sliding backward, and it can usually be folded upward so that it does not impede the sword arm. It is a functional part of some historical breastplates, not a place to hang your belongings.

Shoulders and Arms

Pauldrons, Spaulders and Gardbraces

The Fitzwilliam Museum defines pauldrons as plate armor for the shoulders and upper arms, either one large shoulder-shaped plate or several articulated lames, extending front and back to protect the armpits and often the shoulder blades. A related term is spaudlers: gutterlike pauldrons used from the mid-14th century, made of a series of articulated semicircular lames protecting the point of the shoulder and upper arm.

A gardbrace is a double piece added to a pauldron to reinforce the front lower part. The Fitzwilliam Museum says gardbraces were fixed with pins, pegs or rivets and first appeared in the early 15th century.

In LARP: pauldrons are the most popular first piece after a breastplate and helmet, because they widen your silhouette more than any other part. Our LARP Pauldrons include the Lion Knight Pauldrons and the Flower Knight Pauldrons.

Besagews

Besagews are small, usually round or oval plates attached by straps, rivets or laces to upper body armor. The Fitzwilliam Museum notes that they protect the open spots at the armpit and elbow.

Vambrace, Cannons and Couter

The Fitzwilliam Museum describes the vambrace as the ensemble of plate pieces for the arm below the shoulder, in use in Europe from the 14th to the 17th century, made of two tubular pieces joined by a couter (also spelled cowter). The tubes themselves are called cannons: the upper cannon covers the upper arm, and the lower cannon covers the forearm. Matched sets were usually joined at the elbow by couters.

The couter protects the elbow joint. The Fitzwilliam Museum says it was attached by screws between the upper and lower cannons. It began as one rigid, curved plate in the 14th century, later became a set of movable, loosely riveted plates, and stayed in use until the mid-1600s.

In LARP: in everyday speech, "bracers" can mean both forearm guards and a full vambrace. If you buy bracers, check whether they cover only the forearm or also the elbow. Our LARP Bracers collection includes the Lion Knight Bracers and the Flower Knight Bracers.

Gauntlets

Gauntlets protect the hands. The Fitzwilliam Museum separates two main forms. Mitten gauntlets have a cuff and a plate or articulated lames over the back of the hand, with lames covering the fingers and only the thumb moving independently; the style was popular in German-dominated Europe from the 15th into the mid-16th century. Fingered gauntlets have articulated fingers separated from each other for more independent movement. The Fitzwilliam Museum also lists elbow gauntlets, with a long cuff that reaches the elbow. These were typical of 16th-century foot soldiers and common for light cavalry from the 15th to the 17th century, where they were worn only on the left, or bridle, arm.

In LARP: gauntlets are the piece that most often interferes with play, because they limit your grip on a weapon. Most players use fabric or leather gloves and add decorative cuffs. If you need armored hands, ask us about a custom piece.

Waist, Legs and Feet

Cuisses

The Fitzwilliam Museum defines cuisses as plate armor for the thighs, usually attached to the poleyns at their lower end. They appeared in the 14th century and developed from a single plate over the front of the thigh into articulated lames that surround the whole thigh.

Poleyns

Poleyns protect the knees. According to the Fitzwilliam Museum, plate knee armor first appeared in the 14th century. It has a main cup-shaped piece over the kneecap, often with articulated lames above and below it and a side wing on the outer side. The side wing guards the part of the knee that is most exposed, while the lames let the leg bend.

Greaves

Greaves protect the lower leg, from knee to ankle. The Fitzwilliam Museum describes them as plate armor for the lower legs, made of one contoured plate or two hinged together, and says they were used across Europe from the late 13th to the 17th century.

The Fitzwilliam Museum uses the term "legharnesses" for sets of armor for the leg.

In LARP: greaves are the most practical leg armor, because they protect the shins and are simpler to wear than a full leg harness. See our LARP Greaves, for example the Lion Knight Greaves or the Flower Knight Greaves.

Sabatons

Sabatons are foot armor. The Fitzwilliam Museum describes them as existing in various forms in Europe from medieval times to the 16th century, with mail or plates for the ankle, plated coverings for the foot and a metal toecap, sometimes with a detachable extended tip. In the mid-16th century, broad, blunt "bear-paw" sabatons became popular.

In LARP: sabatons are rare on the field, because boots matter more than decoration when you walk on uneven ground all day. Many players wear good leather boots and add plate covers only for special events or photos.

How the Pieces Connect

A suit of armor works only if its parts can be put on, held in place and moved. Historical armorers used four main solutions, and you can recognize all of them in museum objects.

  • Arming points. Strings or ribbons tied to the padded doublet, attaching plate pieces to the body.
  • Rivets and straps. Overlapping lames held by rivets and leather straps. The Fitzwilliam Museum describes tassets as lames flexibly connected by straps and rivets, and poleyns often have articulated lames above and below the cup.
  • Hinges and buckles. Two-part greaves are hinged. The backplate, according to the Fitzwilliam Museum, may be made of broad strips joined by buckles, or attached to the breastplate by straps or hinges.
  • Screws, pins and pegs. The couter was attached by screws between the cannons, and gardbraces were fixed with pins, pegs or rivets.

The Met also explains the idea of the garniture: a basic suit of armor that, with the addition of further pieces and plates, could be adapted for different purposes. Extra plates for the protection of the throat and hands were introduced around 1300 for tournaments. A garniture is the historical model of what a LARP player does today when they add a gorget or a second pair of pauldrons to an existing set.

In LARP: the same garniture logic works for polyurethane armor: start with the core pieces and add more over time, in the same design series so that everything matches. Our Lion Knight, Flower Knight and Empire series offer matching pieces, and our Leather Body Harnesses are another way to carry and combine pieces.

Steel or Polyurethane for Each Part

For a historical reenactor, steel is the standard material. For LARP, the choice is more practical. Steel can be heavy to wear for a whole weekend, gets hot in the sun, and needs care against rust. Polyurethane resin reinforced with fiberglass gives a similar look at a lower weight and does not rust.

Our armor is made of polyurethane resin reinforced with fiberglass and painted by hand in our workshop in Ukraine. Customers have worn it at large events such as ConQuest of Mythodea and DrachenFest. Because rules vary from event to event, always check the armor rules of your game, especially for closed helmets and anything that restricts vision. Read more about the process in our guide to how polyurethane LARP armor is made, how to look after it on the armor maintenance page, and why we think polyurethane works for players in What Is the Best Type of LARP Armor?

Which Parts Does Your Character Need?

You do not have to buy everything at once. A sensible order for most players is helmet, breastplate, pauldrons, bracers, tassets and greaves, with gorget and extra pieces last. Here is how the parts match some typical LARP characters:

  • Foot soldier, mercenary, landsknecht: open helmet, breastplate, pauldrons, bracers. See the Landsknecht collection.
  • Knight and officer: helmet, breastplate, pauldrons, bracers, tassets and greaves for a full-plate look. See the Knight collection.
  • Paladin and battle priest: full harness with a strong silhouette: gorget, pauldrons, tassets. See the Paladin and Battle Priest collections.
  • Northman and barbarian: fewer plates, more leather: a breastplate or harness, bracers and a simple open helmet. See the Northmen and Barbarian collection.
  • Women's characters: see Women's LARP Armor.
  • Full set for a group or hero: every part matched in design. See LARP Armor Sets, for example the Lion Armor Full Set or the Flower Knight Armor Full Set.

Common Mistakes When Naming Armor

  • Calling a cuirass a breastplate. A breastplate protects the front only; the cuirass is the breastplate and the backplate together.
  • Mixing up greaves and cuisses. Greaves protect the shin, cuisses the thigh.
  • Confusing the vambrace with the bracer. A vambrace covers the whole arm below the shoulder, including the elbow; a bracer in LARP usually means a forearm guard.
  • Calling every shoulder piece a pauldron. Museum catalogs distinguish pauldrons, spaudlers and gardbraces; in LARP, pauldron is a fine general word.
  • Assuming armor is all steel. A real suit combined plate with mail, quilted fabric and sometimes hardened leather.

Want a Piece That Is Not in Our Shop?

If you need a gorget, bevor, gauntlets, besagews or a plackart in the style of your faction, we can make it. Custom pieces are done to order. We usually start with a 2D concept, then a 3D sculpt, and then make the mold and the piece. We can also recolor any design in your colors for free. Tell us your idea on our Custom LARP Armor page. If you equip a whole group, see our Group Orders page: orders from 5 players get 15% off. We ship worldwide, offer instalment payments, and production takes 7 to 21 business days.

Further Reading

Want to see how armor developed as a whole? Read The Evolution of Knight Armor: From Mail to Plate.

Frequently Asked Questions

What Is the Difference Between a Breastplate and a Cuirass?

A breastplate protects the front of the torso, either as one contoured plate or as several overlapping plates. The backplate protects the back, and the two together are called a cuirass.

What Is the Difference Between Greaves and Cuisses?

Greaves are plate armor for the lower leg, made of one contoured plate or two hinged plates. Cuisses protect the thigh and were usually attached to the poleyn, the knee piece, at their lower end.

How Were the Pieces of a Suit of Armor Held Together?

Plate pieces were articulated with rivets and leather straps, and many were tied to a padded arming doublet with arming points (strings or ribbons). Other fittings included buckles, hinges, screws and pins, depending on the piece.

What Is a Vambrace?

A vambrace is the set of plate pieces covering the arm below the shoulder. It is made of two tubes, called cannons, joined at the elbow by a couter.

Which Armor Parts Should a LARP Beginner Buy First?

Most players start with a helmet and a breastplate, then add pauldrons, bracers, tassets and greaves over time. Gorgets and other extras can come last, and many can be made as custom pieces.

Event information is provided for orientation only. LARPSHOPKEEPER is not affiliated with the organizers. Please check dates and details on the official event websites.

Recommended Armor

Empire Commander Armor - Full Set

Empire Commander Armor - Full Set

Empire Commander ArmorFull Set

$1,224.00 $1,360.00

ITEM INFORMATION Category: LARP Full Set. Style: Dark Fantasy, Medieval Fantasy, Commander Armor, Imperial Armor, Fantasy Knight Armor. Product Includes: Breastplate - 1 pc.; Pauldron with bladebr...

Flower Maiden Armor - Full Set

Flower Maiden Armor - Full Set

Flower Maiden ArmorFull Set

$886.50 $985.00
(3)

ITEM INFORMATION Category: LARP Full Set. Style: High Medieval Fantasy, Floral Fantasy Armor, Ornate Knight Armor, Romantic Fantasy. Product Includes: Breastplate - 1 pc.; Backplate - 1 pc.; Pauld...

Flower Knight Armor - Full Set

Flower Knight Armor - Full Set

Flower Knight ArmorFull Set

$1,035.00 $1,150.00

ITEM INFORMATION Category: LARP Full Set. Style: High Medieval Fantasy, Floral Fantasy Armor, Ornate Knight Armor, Romantic Fantasy. Product Includes: Breastplate - 1 pc.; Helmet with padding - 1 ...

See all LARP Armor Sets
Share this article: